top of page

*$99 Total Water 

 Pump Servicing  

Includes Inspection, clean & servicing  of all house hold water Pumps. 

Submersible Pit Pumps - Rain Water Pumps -  Solar Hot Water Pumps - Ring Main Pumps. Controllers & Sensors

We Provide:

Recommendations onsite to get

the most effective use from the        system with lowest ongoing

maintenance.

 INC DOMESTIC PROPERTIES ONLY

*Excludes Parts & Materials, un excess-able fixtures, in or above ground water pipe repairs . Ex GST. Not to be used in conjunction with any other offer or promotion. Jones Services Australia reserves the rights to end the promotion with out prior notice. 

PROMO CODE

TWP-1

Pump Repair, Replacement & Servicing

At Jones Plumbers we have the know how to assist you with any pump-related issues you might be having. We Service: Home, Farm, Office, Food Business, Strata, Civil, & High Rise. We service, install & repair pumps used for: Rain Water - Storm Water  - Town Water - Waste Water - Hot Water -Trade Waste & Fire. We Provide: Liquid Waste Removals - Pressure loss, trouble shooting - Pipe leaks repairs - Tank & Pit Cleaning, maintenance & repairs. Jones Plumbers is a solution-oriented pump and water treatment plant service company, with years of experience  in pump installation, repairs, proactive maintenance, emergency services,  replacement & new installations.

3 Ways We Reduce The Risk Of An Emergency

1/ Early maintenance prevention starts with installation

Appropriate installation is key, @ Jones Plumbers we ensure the pump has been correctly sized and installed to manufactures & design specification, by ensuring the application is not exceeding the pump's manufacturer performance guidelines. A pump system which is pushed too hard will inevitably fail. Such as running the pump off the end of the performance curve. It is best to increase; pumps lift and suction line size to increase performance & efficiencies while reducing the chance of premature or catastrophic failure.  

​

2/ Designed for failure maintenance 

All pumps should be built institute with worst case maintenance in mind, this should include where possible features like: ( Access - Isolation - Bi-passes - Filtration & Fail safes ) 

Timing & maintenance accessibility is everything, especially when it comes to pump maintenance. Not only will a well designed, installed & maintained pump last longer, it will work more efficiently & require fewer repairs with shorter down times over the course of its lifetime.

In Emergency failure maintenance, the pump is repaired in forced down time when you have a fluid back up or build up at the worst time. This is when isolation's, fail safes & bypasses are most likely required, with out them the job becomes a lot harder & costly. Generally when a sudden failure occurs, its has been a long term fault that causes the issue. This usually happens from poor installation and/or when the owners are not taking the proper proactive maintenance steps.

​

3/ Regular maintenance prolongs replacement 

In our experience the core thing that creates a problem is not taking regular maintenance of pumps. Everything you own needs regular maintenance to work properly for a long time. By taking maintenance regularly the chance of better efficiencies increases, running costs and premature replacement decrease.

Keep in mind, following specified maintenance schedules and procedures for your pumping systems, is crucial to the reliability, safety, and efficiency of your plant’s fluid-handling processes. Another way Jones Plumbers helps in reducing downtime, lowering costly reactive maintenance and increases the fluid-delivery system effectively.

We Replace, Repair & Install New,  All Types Of Pumps & Equipments  

Rain Water Pumps & Equipment

Form Mains to Rains Jones Services has you total rain water solutions covered. Available in kits with surface mounted pumps or for dwellings located closer together, a submersible pump option to keep the neighbors happy. We have the range to give you 100% Satisfaction:​

  • Surface Pump Kits with tank floats

  • Submersible Pump Kits with tank float

  • Lifting guide rails 

  • Cabinet Mounted RainBank

  • Filtration - U.V. Treatments & Disinfectants

Surface mounted pump systems

Surface mounted pumps offer easy access for maintenance and service.

  • The original rainwater harvesting device, it directs rainwater for toilet, washing machine and garden use.

Submersible pump systems

Submersible pumps are a quieter pump option for smaller metro blocks.

  • The original rainwater harvesting device, it directs rainwater for toilet, washing machine and garden use.

Rain Bank Wall Mounted Cabinet System 

  • A packaged rainwater harvesting system, incorporating a RainBank dual source controller.

  • Specifically designed to source rainwater for toilets and/or laundry, with automatic mains water back-up.

  • System includes filtration and stop valves for reliability and is package neatly into a lockable metal cabinet for security.

​

Three Stage Filtration: 

The Aquashield Centurion UV System is a three stage water filtration and treatment process of your water supply and is suitable for filtration and disinfection of rainwater, mains water and bore water of a two storey house with two bathrooms.

Unit includes - 2 x 20" jumbo cartridge filters. 1 x U.V. Treatment. 

  • 1 x 20 micron pleated cartridge which is washable and is for dirt, rust, sediment and debris reduction

  • 1 x 1 micron polyspun cartridge for parasitic cyst reduction

  • 1 x U.V. Steriflo UNIT further reduces & removes shadowing of bacteria and virus upto  70 L/min. 

COST EFFECTIVE TREATMENT OF TANK WATER

Environmentally safe, tasteless and odourless, the Acquasafe formula is used for tankwater disinfection and treatment. The key to Acquasafe is a special combination of hydrogen peroxide with silver, supplied exclusively to Davey.

The formula has the ability to destroy bacteria and viruses however at the same time is non-toxic as it breaks down into oxygen and water.

Regular monitoring using Acquasafe test strips is essential to ensure your tank water remains safe.

  • Active in tank – for up to two months

  • Frequency for testing – after a significant rain event or every 2 weeks

  • Dosage rate – 1 litre per 15,000* litres

  • Contact Time – 24* hours

* Contact time can be reduced by increasing the dosage – refer to the technical datasheet for recommendations.

The Submersible pump guide rail system keeps maintenance costs down when the pump can be easily raised up.

Pros:

  • Easy servicing and maintenance of pump station.

  • Pumps can be raised when the tank is in flood

  • Pumps are securely held in position, resulting in better operation and reliability

  • Pumps are easy to remove, replace or repair.   They are attached to chains, and slide up the guide rails

  • Pumps typically fitted in this way are of higher quality

  • The longer lifetime of the entire system results in long term cost savings

Pro Rain Water Harvesting Pumps 

Commercial sized rainwater harvesting pump system controlled by the industry leading RainBank Controller. Available as fixed speed single phase or variable speed three phase.

A rainwater / mains water interconnection pump set specifically designed to source rainwater for high flow applications with seamless switching to mains water for back up.  Ideal for rainwater harvesting on metropolitan buildings with large roof areas such as:-

 

  • Schools

  • Apartment buildings

  • Warehouses and factories

  • Motels

  • Police stations

  • Council buildings

  • Fast food outlets

​

Sewer Grinder - Cutter / Shredder Pumps

 Cutter / Shredder Pumps for pumping semi-screened or grey water containing string-like material. High head single channel sewage handling submersible sump pumps with cutting impeller, available with a choice of single or three phase motors. cutter / shredder pumps are able to pump semi-screened or grey water of neutral pH containing up to 20% small soft solids or 1% string-like products.

 

Not suitable for sanitary products.  Use grinder models for this application.

 

APPLICATIONS:

  • Sewage water pumping

  • Sump emptying

  • Septic effluent disposal

  • Water transfer

  • Pumping of light slurries and factory waste

  • Pumping waste water with stringy or long soft solids in suspension

 Grinder Sump Pumps 

A submersible pump consisting of a solids handling grinder inlet with a high head open impeller to pump waste water containing soft solids in suspension.

 

SUITABLE APPLICATIONS:

  • Grey & Black Water Pumping

  • Sump Emptying

  • Septic effluent & sewage disposal 

  • Pumping of waste water with soft solids in suspension

Able to pump soft organic solids, sanitary and rubber products and even some textiles in suspension by shredding into a slurry.

Use with slide rail kits for ease of removal for servicing.

Storm-water / General Purpose Sump Pumps

 High flow and low heads Sump Pumps 

Able to pump clean or grey water of neutral pH containing up to 20% soft solids or 1% fine solids.                                      Rail kits are available to suit these pumps.

​

  • Semi-vortex open impeller sump pump design that is less susceptible to blockage.

  • Suitable for pumping light slurries with soft solids in suspension - grey water, sump emptying, septic effluent disposal and water transfer.

 

Not suitable for sewer products.  Use grinder cutters & shredder models for this application.

​

SUITABLE APPLICATIONS:

  • Small- Medium Ground Based Storm Water Pits 

  • Sump Emptying

  • Water Transferring 

  • Use with slide rail kits for ease of removal for servicing.

 Sump Master Mini 2C for control of up to two manual sump pumps  

 

APPLICATIONS

  • Underground carparks

  • Cellars

  • Garages                                                                                                    ​SUITABLE APPLICATIONS:

  • Provides fully automatic pump control and protection of two manual sump pumps up to 750 Watts each. 

  • Ideal with two Davey D40M or two D75M sump pumps to pump clean or slightly dirty water from a sump or tank.

  • Simple operation with an Auto / Off / Manual control switch.

  • Straightforward control via 3 floats, a low level float, start float and high level float.

  • Floats use 24VAC (extra low voltage) for added safety.

  • Lead pump is rotated on every start-up to equalise the hours of operation to maximise pump life.

  • Programmable lag pump delay from 10 seconds to 90 seconds. Factory set at 30 seconds.

  • Easy replacement of sump pumps as they plug directly into 240V 3-pin power sockets on the bottom of the control panel.

  • Provides high level, low level and no flow alarms.

  • All alarms will activate an alarm light, buzzer and a building management system (BMS) output.

​​

Hot Water Circulation Pumps

Domestic hot water circulator pumps for instant hot water at your fingertips. Circulator pumps are ideal for domestic heating applications, secondary hot water services, air conditioning and cooling systems.The advanced multi-speed, shaft-motor can provides a long and reliable operating life. 

  • Max operating temperature 120 degrees C

  • Max service pressure 1000 kPa

  • Includes unions and gaskets

Town Water Booster Pumps

Commercial Potable Water Boosting Pumps  

Variable speed / constant pressure system consisting    controller, VSD unit, pressure transducer, 18 litre pressure tank, inlet and discharge manifolds, isolating and non-return valves, all mounted on a stainless steel skid base.

 

APPLICATIONS

  • Pumping of clean, non-aggressive liquids, free of fibres in suspension, suitable for applications such as:-
    • Agriculture and turf watering
    • Commercial and industrial processes
    • Pressure boosting in commercial buildings
    • Water Supply – Rural and industrial
    • Commercial – High pressure washing and water treatment

​

If your project requires additional water pressures to service outlets  

Contact us for in house design & construction advice  ​

Fire Booster Pumps

Diesel Pumps
3 Faze Jacking Pumps

     Fire Pump Services Quoted - Supplied & Built  on Request.

Request Your Appointment Today!

We are ready to help! Get in touch with us by calling the number or filling out the Contact form!

Quote the Promo Code TWP-1 to take advantage of our Water Pump promo

​

- OR -

​

bottom of page